Posts Tagged ‘210’

Reset Canon PG-210 ink cartridge

Canon pg210 reset empty cartridge error

Each time the cartridge is removed from the Canon printer an empty cartridge message appears and a blinking amber light will come on, on the printer.
Turn off your printer and unplug.
Press and hold down the “Power” button, while simultaneously plugging the power source back into the wall.
Press and hold the “Cancel/Stop” button (while still holding down the power button) three times.
Release the power button and wait for ten seconds, until the printer screen says IDLE
Press the “right arrow” key on the printer until the screen reads Shipping Mode 3.
Press the “OK” button twice. At this point, a test page should print.
Open the top cover of the printer, as if you were going to change the ink cartridges.
Unplug the power source to the printer, without first turning it off with the “Power” button.
Remove the ink cartridges and close the cover.
Plug the printer power source back into the wall and press the “Power” button to turn it back on.
Replace the cartridges and the printer ink is full.

Reset canon pg 210 black cartidge

PG 210 cartridge works with the following Canon printers

PIXMA iP2702
PIXMA MP240
PIXMA MP250
PIXMA MP270
PIXMA MP280
PIXMA MP480
PIXMA MP490
PIXMA MP495 Wireless
PIXMA MX320
PIXMA MX330
PIXMA MX340 Wireless
PIXMA MX350 Wireless

If you need new cartridges:

Posted on December 15th, 2010 by  |  10 Comments »